JEWEL LED Tail light ULTRA for WRX STi (VAB) /WRX S4 (VAG)
Available with WRX STI/S4(VA#) and equipped with Opening and Locking animation
Position
Braking
Reverse
All
■Opening and Locking animation※
Incorporating the style of European cars, these lights feature special start up and shut down animations when locking and unlocking the car.
This function adds a sleek sense of sophistication, and surely gathers admiration and attention to your vehicle.
Available only for a model with a keyless entry function.
*Wiring connection to Constant Power and Ignition Power is necessary for this function. Wiring kit included.
■Sequential function
Our ULTRA tail lights offer sequential functions, adding animation to your turn signals. Despite its mainly Japanese audience, Valenti lights comply with safety standards in Europe, and has obtained the European E-mark.
The light can be switched to the traditional blinker mode by changing the wiring connection at the back of the tail light.
■Side marker lighting
Side marker turns on as in conjunction with Position light.
■154 LEDs & 4 LED light bars in total for each set
Our LED light bars are 3D shaped to add extra dimension, creating a fantastic rear view that is guaranteed to draw eyes towards your vehicle. It creates a sophisticated look that is a good fit for all discerning users. This is an all-LED model that uses high intensity LEDs for all Position, Brake, and Blinker. These premium lights shine with such brilliance, we call them our Jewel LEDs.
■ 2 color options to choose from
○ Red lens/Gloss black
○ Light smoke/Black chrome
■Built in high flash control resistor
A high flash control resistor is built into the light’s housing, so there is no need to worry about the high flash (AKA hyper flash) phenomenon!
Installation is a coupler-on type that uses a stock coupler, making it very easy to install.
Compatibility
●SubaruWRX STI:VAB :2014.8~2020.7All grades
●SubaruWRX S4 :VAG :2014.8~2021.3All grades
Note:OEA may not function well with a vehicle installed with a 3rd party security system or a relay.
Valenti Jewel LED Tail Light ULTRA for Subaru Levorg VN
Valenti introduces its latest Jewel LED light for the Levorg VN!
As it incorporates the tastes of European cars, special start up and shut down animations can be seen when locking and unlocking the car.
This function adds a sleek sense of sophistication, and surely gathers admiration and attention to your vehicle.Available only for a model with a keyless entry function.
*Wiring connection to Constant Power and Ignition Power is necessary for this function. Wiring kit included.
■Sequential function
Our ULTRA tail lights offer sequential functions, adding animation to your turn signals. Following revision of the law in Japan, the sequential “Flow Action” blinker is now compliant with road safety standards there. Of course, it also complies with safety standards elsewhere, and has obtained the European E-mark. This can be switched to the traditional blinker mode by changing the wiring connection at the back of the tail light.
■Side marker lighting!
Side marker turns on as in conjunction with Position light.
■232 LEDs&4 LED light bars in total
Our LED light bars are 3D shaped to add extra dimension, creating a fantastic rear view that is guaranteed to draw eyes towards your vehicle. It creates a sophisticated look that is a good fit for all discerning users. This is an all-LED model that uses high intensity LEDs for all Position, Brake, Blinker, Reverse, and Backfog.
■Reverse light and Fog lamp on both sides!
Reverse light and fog lamp are on both side where the jenuine tail light has them only on one side.
■2 color variations to choose from!
○Red lens/Gloss black○Light smoke/Black chrome
■Built-in high flash control resistor!
A high flash control resistor is built into the light’s housing, so there is no need to worry about the high flash (AKA hyper flash) phenomenon! Installation is a coupler-on type that uses a genuine coupler, making it very easy to install.
【Compatibility】
●Subaru Levorg :VN5/VNH :2020.10~ All grades
Note:OEA may not function well with a vehicle installed with a 3rd party security system. OEA function requires wiring to Constant power and Ignition power.
Valenti Jewel LED Tail Lamp Ultra for Toyota GT86 & Subaru BRZ
■ Equipped with Door Opening and Locking Action function
This is a function that is also installed in the tail lamps of European cars, etc., and the tail lamp lights up in motion when locking or unlocking.
* Connection to constant power supply and ignition power supply is required for the operation of the function.
■Features a Sequential Blinker (Flowing blinker)!
Adopted “sequential blinker” !
The setting of “flow” or “no flow” can easily be changed by modifying wiring connection method on the back side of the tail lamp.
■ European-style side marker lighting!
Adopted side marker lighting that incorporates the taste of European cars (position-linked lighting)
■ Selectable position lighting mode
Equipped with a turn-signal position mode, situated in the signal part, with different lighting pattern to choose from.
Position blinker position mode ON
Position blinker position mode OFF
It is possible to switch on / off by wiring connection on the back side of the tail lamp body.
■Adopted outer lens shape and rectifying fin that imaged genuine tail lamp!
Outer lens shape and rectifying fins are used to make the image of a genuine tail lamp.
■ A Total of 154 LED & 2 LED Light Bars!
The position lamp lighting with the 3D shaped LED light bar creates a fantastic rear view and catches the eyes of the following vehicles.
An all-LED model that uses high-brightness LEDs for all positions/brakes and blinkers.
An inner lens is used so that the LED chip cannot be seen directly, giving a stylish impression even when the light is off.
■Two Color Variations Available !
Red lens/black
Part number: TT86ZU-RG-1
Light Smoke/Black Chrome
Part Number: TT86ZU-SB-1
■Built-in high flash control resistor!
Built-in high flash control resistance in the tail body, no worries about high flash phenomenon!
Mounting is a coupler on type that uses a genuine coupler.
Note: When connecting the OEA function, vehicles with external security or external turn signal control relay may not work properly.
Operation of the OEA function requires connection to a constant power supply, ignition power supply
Valenti Jewel LED Tail Lamp REVO for GT86 (ZN6) & BRZ (ZC6) with Real Carbon Body
Presenting Valenti Jewel LED Tail Lights’s newest addition : The Carbon Tail Light !
Now you can update the exterior of your vehicle in the latest in modern design along with improved lighting technology.
Compatibility:
Model
Model year
Toyota
86
ZN6
H24.4-R3.7
Subaru
BRZ
ZC6
H24.3-R2.11
Uses high-brightness 92LEDs 48LEDs for position / stop lamps,32LEDs for turn signals, and 12LEDs for back lamps, for a total of 92LEDs.
Brightness is achieved by adopting high-brightness LEDs for all.
Color:
Smoked lens / Real Carbon
Lighting images:
Turn signal
Position
Brake
Back Lamp
All lights up
Off
■ Dry carbon body Dry carbon is used for the body part, and a sporty rear view is produced by combining it with a smoke lens.
VALENTI’s Jewel LED taillight for your Mazda Roadster
Now you can update the exterior of your vehicle in the latest in modern design along with improved lighting technology !
Sequential turn signal (flowing turn signal) adopted!
Easily change the “flow” and “non-flow” settings by simply changing wiring connections.
Adopts high brightness 120LED & 4LED light bar! Selectable lighting mode.
An all-LED model that uses high-brightness LEDs for all 36 small / 54 brakes and 30 blinkers.
The inner lens design of the blinker part enhances the visibility of the blinker, giving a more stylish impression.
Two color variations available according to your taste and vehicle!
Red lens / black ・ Light smoke / black
Built-in high flash control resistor!
High flash control resistor is built ,no need to worry about the high flash phenomenon!
Installation is a coupler-on type that uses a genuine coupler.
[Compatible model]
● MAZDA Roadster Model: ND5RC / NDERC Year: 2015.5 ~ Compatible with all grades
◆ Euro blinker function. You can blink the blinker three times with a single click on the blinker lever.
◆ High flash control function. You can prevent the high flash (the phenomenon that the blinker gets faster) by replacing the LED bulb. In addition, it is possible to correspond to all patterns from the genuine light bulb state to the full LED.
◆ Answer-back support. Answer-back function at the time of door lock / unlock is also available in all compatible models.
◆ A wide range of compatible models Compatible with vehicles equipped with 8-pin relays such as Toyota, Lexus, Subaru, Suzuki, Daihatsu.
Hanshin-Imports carries a great selection of exterior components from Valenti to both customize and to add a modern look to your vehicle.
On this page, you are looking at the Valenti HID Xenon Conversion Kit for your hallogen headlamps or Fog Lamps for the following six types of lightbulbs:
Lets compare the light of a Stock 4200k Xenon kit (Left) and the 6000K kit by Valenti (Right)!
■ Color temperature Premium white 6000K
○ Valenti Jewel LED position bulb series; the color of the light matches perfectly the “Premium White 6000K”.
■ High quality design which made brightness and durability compatible!
○ The burner section glass tube is made of high quality quartz glass which is excellent in cutting UV, heat resistance and durability. The high UV cut effect firmly blocks the damage caused by “ultraviolet light” on the headlamp lens and reflector.
■ We use a silver design “thin 35W ballast” that will fit in perfectly your engine bay. Direct wiring is also possible without connecting to the battery (except for H4 System). Since the battery connection harness is included, it can be eliminated by installing it even in the case of flicker or lighting that may occur with the vehicle.
■ 6 types lineup
○ A lineup of six bulbe shapes to accommodate various vehicle types. Recommended for those seeking brightness.
Hanshin-Imports carries a great selection of exterior components from Valenti to both customize and to add a modern look to your vehicle.
On this page, you are looking at the Valenti Jewel LED Tail Lamp Revo. Now you can update the exterior of your vehicle in the latest in modern design along with improved lighting technology.
Hanshin-Imports carries a great selection of exterior components from Valenti to both customize and to add a modern look to your vehicle.
NOTE: This product has been discontinued. Grab one before they’re out of stock indefinitely!
On this page, you are looking at the Valenti Jewel LED Tail Lamp Revo. Now you can update the exterior of your vehicle in the latest in modern design along with improved lighting technology.
The Valenti Jewel LED Side Marker for GT86 and BRZ
Now you can update the exterior of your vehicle in the latest in modern design along with improved lighting technology.
Hanshin-Imports carries a great selection of exterior components from Valenti to both customize and to add a modern look to your vehicle.
9 LEDs with high brightness on one side + hexagon reflector (hexagonal reflector) adopted to achieve high luminosity.
In addition, there are also jewel LED tail lamps for 86/BRZ and jewel LED back fog lamps that have the same color.
The kit is available in 3 colors, for a wide choice according to user preference and their car’s body color.
High brightness LED – 18 LEDs!
Adopts 3/3 high-brightness LEDs on each side for a brilliant shine.
Three color variations allow coordination to match any car body color
The side marker color line-up includes three types: light smoke/black chrome, amber/chrome, and clear/chrome..
Easy to install!
Installation is intuitive with an easy to connect and disconnect system. Simply replace the marker lamp body.
Exterior components from Valenti to both customize and add a modern look to your vehicle.
Valenti Jewel LED Rear Fog Lights – Classic Model
Now you can update the exterior of your vehicle in the latest in modern design along with improved lighting technology, all while keeping a classic look.
Overwhelming shine and sparkle with in total 36 high-brightness LEDs! 24 LEDs are used for the back lamp, and 12 LEDs + LED light bar are used for the fog lights.
Coupler-on design that does not require wiring!
The rear fog body is a simple design that can be replaced with a factory one by turning on the coupler that does not require wiring. For vehicles without factory fog lights, it is necessary to replace the included “turn dimmer switch” and “rear fog control relay”*.
* “Turn dimmer switch” and “rear fog control relay” are included in the product for vehicles without factory-installed rear fog lights.
Specifications:
Colors:
Light Smoke Lens/Black Chrome
Clear Lens / Red Chrome
Half Red Lens / Chrome
Models – Fog Lights Lever:
No : standard (No lever/switch included, for cars with factory-installed rear fog lights)
Yes : lever/switch included, forcars without factory-installed rear fog lights
Presenting Valenti Jewel LED Tail Lights.
Now you can update the exterior of your vehicle in the latest in modern design along with improved lighting technology.
■ Three color variations that you can choose according to your taste!
○ Clear / Red Chrome ○ Light Smoke / Black Chrome ○ Half Red / Chrome
Note: This model is discontinued. Grab the final products while quantities last !
Or order the newer sequential model.
Toyota GT86 / Subaru BRZThe Toyota 86 / GT86 and Subaru BRZ are an ideal platform of the tuning enthusiast. At Hanshin-Imports we admit with pride that these vehicles have a soft spot in our hearts. We’d even consider that we specialize in these cars. Owning our...