+41 21 784 5050 info@hanshin.ch

AEM Boost Control Solenoid Kit


    3 in stock (can be backordered)

    The model 30-2400 Boost Control Solenoid is specially modified for use as a boost control solenoid in high boost automotive systems. The kit includes all the necessary fittings to plumb your wastegate for either an internal or external wastegate.

    The 30-2400 Kit Contains:
    1x Fast Response Solenoid
    1x Mating Connector Assembly
    1x 1/8” NPT Sintered Muffler
    2x 1/8” NPT to 3/16” Hose Barb Adapters

    Operating Voltage: 12VDC Operating Frequency: 31hz Duty Range: 10 to 90% Max Pressure: 120 PSI

    Electrical Connection: Polarity is unimportant. Hook
    one wire to switched 12 Volts and the other to the AEM EMS’s PW2 output or the driving devices boost control
    line. NOTE: on the SRT4 EMS 30-1510 PW2 outputs +12V. Hook up one wire to PW2 and one wire to ground.

    If you are not sure please refer to your EMS instructions/pin out sheet and verified the polarity output on PW2.
    When energized, ports 1 & 2 are connected, when de-energized, ports 2 & 3 are connected. The port

    numbers are clearly noted on the solenoid body.

    Additional information

    Weight 2 kg


    There are no reviews yet.

    Be the first to review “AEM Boost Control Solenoid Kit”

    Your email address will not be published. Required fields are marked *